Ford Bronco Sport DIY Remote Start System
Take your installation into the fast lane on your Ford Bronco Sport with a DIY Remote Starter kit from MotorCityAutobahn.com. True vehicle-specific systems, so there are no plugs or harnesses to sort through meant for other Ford models, no computer programming, or manuals to download before installation. No detours. Just a direct route from delivery to your Bronco Sport following our step-by-step installation guide we mapped out for you.
Ford Bronco Sport Ford DIY Remote Start Kits Remote Start Features
Get a head start every winter morning warming up your Bronco Sport's interior and defrosting the windshield from the comfort of your home using your existing Ford keyless entry remote, or cool it down on those hot summer afternoons after it's been parked out in the sun for hours.
Dual-Activation Capability
This system is activated using your existing Ford keyless entry remotes and/or optional long-range remotes.
Automatic Heat/Defrost/AC Activation
Just leave your climate controls on the last setting where you need them when parking your truck, and the system will automatically turn them on shortly after you activate the remote starter system.
15-Minute Remote Start Run Time
The remote starter system will automatically turn off after 15 minutes.
Active Key Takeover
The vehicle will stay running when the driver's door is opened, so you won't have to manually restart your truck with the key every time after you remote-start it.
Active Keyless Entry
You won't lose your ability to remotely unlock the vehicle's doors while it's running by the remote starter, so you won't have to use the key to get into the vehicle.
Remote Start Cancel
You can shut down the remote starter sooner the same way you activated it.
Long-Range Remotes Upgradeable
Want 4X more range than what your Ford factory remotes provide? No problem. Plug-in upgrade this system with any set of Viper D-Series long-range remote kits any time during or after installation (not included, sold separately).
Without Horn Beep Confirmation Option
This feature is only available with the purchase of any of the long-range remote upgrades offered during checkout.
Ford Bronco Sport DIY Remote Start Installation Overview
Plug-In T-Harness Installation
One Plug-in T-Harness DIY Installation. The system simply plugs in behind the vehicle's OBD2 port mounted at the lower left edge of the driver's side dash.
No OBD2 Port Blocking
You won't lose normal access to your vehicle's OBD2 port. No unplugging the remote start system every time the vehicle's OBD2 port is needed for vehicle service or additional accessories.
No Computer Programming Required
No vehicle-specific computer programming or manual downloads required. Just go straight from delivery to your vehicle for installation.
No Key or System-to-Vehicle Programming Procedures
No sequence of buttons to press or time-sensitive key programming procedures involved. Just plug the system in and turn the ignition on and off to activate the system.
No Battery Disconnect Required
You don't have to disconnect and reconnect the vehicle's battery for installation, so there's no inconvenience of having to reset your vehicle's menu settings.
Step-by-Step Installation Manual
Included hard copy of our step-by-step installation guide.
